Quote:
Originally Posted by MargusV
Can You, please, elaborate in a bit more detail the issues with fitment?
|
The only minor problem is that the lamps sits a mm or two too high in the lamp mask. You can see it in this image
Not a big problem, can be fixed by either moving the lamp a little bit down by elongating the holes in the fixings, or by adjusting the plastic with a file.
The lamp is delivered with a new height adjustment bracket. Very sturdy, better than the OEM (but you need tools to adjust it). It also comes with a connector that don't have a matching connector in the GG harness. I had to make an adapter cable from the lamp's connector to the H4 connector (the red connector and cable in the image below). Not a big deal.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|