View Single Post
Old 06-14-2020, 05:58 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
Join Date: Oct 2010
Location: Australia
Posts: 7,981

Originally Posted by JesseeS View Post
2011 EC300 six days After reading a lot of the info out there I?m going to double and then triple check my float height. I faintly recall setting it at 18 and read it should be between 14-16. Going to check
If it's a 2011 with the ASII carb with the flat cap mounted by 2 M5 bolts (not the round screw on carb cap), then the float level should be 6.5-7mm

The 16mm height is from the older carbs that had deeper bowls. See the sticky in this section.
Reply With Quote