Quote:
Originally Posted by snailspacejase
Ok. So I changed the needle to a NEDJ in clip 2. It has not cured the problem but I'm going to drop the main down to 172 next and see how that goes. Bike runs nice and smooth now with no burble/4 stroking at part throttle. However it is running hotter and pinks when you roll on and off small throttle openings. Also a marked reduction in bottom end torque. I'm going to raise the needle 1 clip and take it from there.
|
What sized pilot. Expect to use a 42 with the J diameter, and yeah go a clip richer. If thats too rich NECJ#3 will put you half way between the two.
The float heights are stock at 6.5mm but if you lower the fuel level another 1-2mm it will work much better.