I have installed the JD kit and as you say the needles are thicker than the OEM ones. Instead of the 178 main there was a 176 in the kit which I installed. I e-mailed them if thats either a printing error -it says install the 178 included in the kit- or a wrong main jet has been packed.
Instead of the required 42 pilot jet I put the 40 in, and the bike runs well with it. Low down burble is almost gone and the idle is stable although it is very low (as I prefer it).
But I have massive other problems with it, but will open an own thread soon. Gotta run now...
Doc
|