Quote:
Originally Posted by 12Bravo
Started to unscrew the cap where the slide goes into the carb. "Click" it opened back up and moved as it should. But upon more inspection when the throttle is turn to 100%, I can hear it click and gets stuck open.
|
Yikes - that's no good
You might have already done this, but check to make sure the throttle tube isn't getting snagged on something too.
I'd pull the slide out and make sure the plastic deal (not sure what it's called) with a notch is fitted correctly - believe this should keep the throttle cable from getting stuck if it's WFO. Make sure the spring still has resistance too and that it's all connected correctly with the needle.
I'd also check into getting the Motion Pro throttle cable if it's available for your year.
Glad you're ok and the bike didn't seize or have any piston/cylinder damage.