So I took the compression stack apart and started to measure the shims.
This is how mine was set up.
pist.
31.8 0,15
31.8 0,15
27 0,15
26 0,15
24 0,1
22 0,1
20 0,1
18 0,1
16 0,1
14 0,1
11 0,2
11 0,2
I have not yet removed the pushrod with the rebound and midvalve from the cartridge. (haven't figured out how to disassemble that yet..
) But what do you guys say about that setting so far om the compression part?