![]() |
|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
got a new to me 2005 gasser 200,took out the carb to see what jetting it had,couldnt make out anything on the needle,I assume its stock,it had a 180 main and 40 for jets ?does that sound right,havent started it yet,just sorting some things out,needs a pipe and the kicker ratchet stuff replaced like my 300 needs to have fixed also
![]() |
#2
|
||||
|
||||
![]()
I have an 04. At 0 - 1000 ft, temp 5 - 10 deg C
I'm running 42p, 178m, N1EE needle on #2, slide #6. |
#3
|
||||
|
||||
![]()
ok thanks,Ill see how it runs before and after messing around some
|
#4
|
||||
|
||||
![]()
What was Billy Burns running? The 200 is the one size GG I never jetted, but I would assume it would want to be slightly richer across the board than the 250.
|
#5
|
||||
|
||||
![]()
If I remember correctly he said he was running 178M, 42P, LTR needle #2, and that was during July.
__________________
2004 GasGas DE250 |
#6
|
||||
|
||||
![]()
bike ran great with the stuff thats in it,no loading up at all and it was cold out! tells me it must be rich in the warm weather
|
#7
|
||||
|
||||
![]()
heres a few pics of the 2hunny with my old yellow plastic on it
![]() ![]() |
#8
|
|||
|
|||
![]()
looks fantastic! what color was the original plastic? I thought they all were yellow?
|
#9
|
||||
|
||||
![]()
was yellow,no graphics anywhere and not so nice still worth a grand
![]() |
#10
|
|||
|
|||
![]()
a needle with no Id on it might be an ltr needle as I believe les ground off the id because i think he changed it around a bit. Not 100% on that tho.
|
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
where to go from here. jetting q. | dank | Enduro Intake/Carburetion - 2 stroke | 105 | 04-11-2011 04:25 PM |
2005 DE250 Jetting | the eel | Enduro Intake/Carburetion - 2 stroke | 3 | 09-02-2006 04:53 PM |