|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Silencer Grommets
Does anybody have a line on where to buy new grommets for FMF silencers?
Mine are about junk and need replacing. I called FMF and they do not sell them seperate, they only come with a new silencer. I was looking at McMaster-Carr and they do not have any that are a close match. Any ideas?
__________________
07 GG EC 300 05 KTM 250 exc 99 KTM 640 enduro |
#2
|
||||
|
||||
Do you mean the tubing where the stinger and pipe meet?
__________________
2004 GasGas DE250 |
#3
|
||||
|
||||
Or, after I thought about it, the mounting grommits?
BE250026005 - 15-SILENTBLOCK SILENCER From your dealer.
__________________
2004 GasGas DE250 |
#4
|
||||
|
||||
I second the OEM stuff, I had to replace my for my TCII, also use OEM.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
|||
|
|||
eff I believe he is talking about the rubber grommets that you put the bolt through to mount the silencer to the subframe
I got a bigger problem ... my grommets are fine ... but the hole they go into has worn into a bigger size so now the grommets roll around inside the hole and the pipe fits kind of loose, I don't see this getting anything but worse. Only solution is a new silencer or alu welding and machining new holes. which would probably cost the same as a new silencer ... |
#6
|
|||
|
|||
Could someone take a pic of this? I'm not sure if I understand, but sounds important.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#7
|
||||
|
||||
Thanks for tip and the part#
I guess I should have made it a little more clear. I was talking about the mounting grommets. I have the same problem also of the mounting holes being worn out on the silencer but I was going to weld them up and machine them back to size.
__________________
07 GG EC 300 05 KTM 250 exc 99 KTM 640 enduro |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
200 Vs 250 silencer / end can | iancp5 | Enduro Engine - 2 stroke | 1 | 06-04-2009 02:41 AM |
MC Silencer on ab EC 250 '08 | GG27 | Enduro Engine - 2 stroke | 3 | 03-31-2008 11:16 AM |
Side panel mounting screws & grommets: 07 EC 300 | Gregarious | Enduro Chassis & Body | 2 | 02-19-2008 07:07 PM |