|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
09-28-2009, 12:15 PM
|
|||
|
|||
Sprocket cross references
So what other brand bikes have the same rear sprocket, Have an 06 ec300 and trying to find aftermarket sprockets, I have read late model husky sprockets will fit, but what model and year is a definate fit? does anyone else make a front sprocket for the gassers, I saw on one site they were advertising a renthal front, but when I go to renthal, they say no data available for gassers, so maybesomeone stumbled upon a front sprocket for another make/model that fits?
thanks 
|
|
#2
09-28-2009, 01:39 PM
|
||||
|
||||
|
2004 and up husky 4 stroke definitely fit the rear. probably earlier fits too (2000-ish?) (te/tc 250/450 etc..)
|
|
#3
09-28-2009, 02:20 PM
|
|||
|
|||
|
thanks stainless!
|
|
#4
09-28-2009, 03:13 PM
|
||||
|
||||
|
all Huskys that are newer than 1992 have the same sprocket, which is the same as the rear on all EC and MC gasgas'
1993-1995 suzuki DR 250 rear sprockets work, and 1990 - 1999 DR 350 rears work also heres a link to a sprocket table http://www.nwa.co.nz/Products_img/Su...%20(280kb).pdf
|
|
#5
10-05-2009, 07:13 AM
|
|||
|
|||
|
thanks noobi, I found a similar list for rear sprockets
•1990 Husqvarna CR125 •1991 Husqvarna CR125 •1995 Husqvarna CR125 •1996 Husqvarna CR125 •1997 Husqvarna CR125 •1998 Husqvarna CR125 •1999 Husqvarna CR125 •2000 Husqvarna CR125 •2001 Husqvarna CR125 •2002 Husqvarna CR125 •2003 Husqvarna CR125 •2004 Husqvarna CR125 •1990 Husqvarna CR250 •1991 Husqvarna CR250 •1992 Husqvarna CR250 •1993 Husqvarna CR250 •1994 Husqvarna CR250 •1995 Husqvarna CR250 •1996 Husqvarna CR250 •1997 Husqvarna CR250 •1999 Husqvarna CR250 •2000 Husqvarna CR250 •2001 Husqvarna CR250 •2002 Husqvarna CR250 •2003 Husqvarna CR250 •2004 Husqvarna TC250 •2004 Husqvarna TC450 •2005 Husqvarna TC450 •2001 Husqvarna TC570 •2002 Husqvarna TC570 •1991 Husqvarna TC610 •1998 Husqvarna TC610 •1999 Husqvarna TC610 •2000 Husqvarna TC610 •2002 Husqvarna TE250 •2003 Husqvarna TE250 •2001 Husqvarna TE400 •2002 Husqvarna TE400 •1998 Husqvarna TE410 •1999 Husqvarna TE410 •2000 Husqvarna TE410 •2002 Husqvarna TE450 •2003 Husqvarna TE450 •1991 Husqvarna TE610 •1998 Husqvarna TE610 •1999 Husqvarna TE610 •2000 Husqvarna TE610 •2001 Husqvarna TE610 •2002 Husqvarna TE610 •2003 Husqvarna TE610 •1990 Husqvarna WR125 •1991 Husqvarna WR125 •1995 Husqvarna WR125 •1996 Husqvarna WR125 •1997 Husqvarna WR125 •1998 Husqvarna WR125 •1999 Husqvarna WR125 •2000 Husqvarna WR125 •2001 Husqvarna WR125 •2002 Husqvarna WR125 •2003 Husqvarna WR125 •2004 Husqvarna WR125 •1995 Husqvarna WR250 •1996 Husqvarna WR250 •1997 Husqvarna WR250 •1998 Husqvarna WR250 •1999 Husqvarna WR250 •2000 Husqvarna WR250 •2001 Husqvarna WR250 •2002 Husqvarna WR250 •2003 Husqvarna WR250 •2004 Husqvarna WR250 •1995 Husqvarna WR360 •1996 Husqvarna WR360 •1997 Husqvarna WR360 •1998 Husqvarna WR360 •1999 Husqvarna WR360 •2000 Husqvarna WR360 •2001 Husqvarna WR360 •2002 Husqvarna WR360 •1990 Suzuki DR250S •1991 Suzuki DR250S •1992 Suzuki DR250S •1993 Suzuki DR250SE •1994 Suzuki DR250SE •1995 Suzuki DR250SE •1990 Suzuki DR350S •1991 Suzuki DR350S •1992 Suzuki DR350S •1993 Suzuki DR350S •1994 Suzuki DR350SE •1995 Suzuki DR350SE •1980 Suzuki DR400 •1979 Suzuki RM250 •1980 Suzuki RM250 •1980 Suzuki RS250 •1981 Suzuki RS250 these all take the same rear sprocket.......now can anyone cross the front sprocket?????
|
|
#6
10-05-2009, 07:14 AM
|
|||
|
|||
|
one more, can a moderator make this a sticky, or at least add it to the cross reference for parts.....sure would save alot of time
|
|
#7
10-05-2009, 05:02 PM
|
||||
|
||||
|
one thing to note. if you can, get the huaqvarna over the suzuki sprockets if you can. i compared a rear DR sprocket and it wasnt even close.
im not sure if the one the shop found for me was the right one or some thing else. just something to be aware of for front sprockets, for a 125, maybe others. a 99' - 04' YZ125 fits. i have a genuine yamaha one on atm. but im not sure whether that front will fit other bikes...
|
|
#8
10-05-2009, 05:52 PM
|
||||
|
||||
|
What's wrong with the OEM stuff, Talon make a good sprocket....
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
|
|
#9
10-07-2009, 08:51 AM
|
|||
|
|||
|
nothing wrong with oem,,, just limits availability and price.
|
|
#10
10-08-2009, 07:20 AM
|
||||
|
||||
|
125 countershaft sprocket is completely different than bigger bikes.
Talon, Ironman, and TM (OEM) countershaft sprockets for the 200/250/300. FYI, this has been in the parts crossover link on the main page for a long time, in the form of a general statement ("late model Husky").
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Air Filter Cross Over ?'s | lordfeyr | Enduro Intake/Carburetion - 2 stroke | 11 | 02-25-2011 11:00 AM |
| reeds cross-over? | moff747 | Enduro Intake/Carburetion - 2 stroke | 4 | 05-25-2010 02:32 AM |
| crankshaft cross-over | whodat | Enduro Engine - 2 stroke | 2 | 04-26-2010 06:05 AM |
| Front sprocket cross over | Silver | General Discussions & Announcements | 3 | 09-03-2008 08:53 PM |
| How do we add to the cross over list? | brains | General Discussions & Announcements | 1 | 07-26-2007 03:11 PM |
Linear Mode
