|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2013 300XC Sub Frame
I made a big mistake and flipped my bike over backwards, the result was I destroyed the plastic sub frame completely to include the rear fender, tail section and air box, the only parts left behind the gas tank is the exterior plastics.
I was wondering if anyone knows if a previous year aluminum sub frame would fit on a 2013? Not sure why they went to plastic, I am not planning on doing this again but, the way things are going you never know.
__________________
Wan is a Wannabe Rock Rider... After Riding Rocks, Wan is Wan Ball Dez 2009 BMW R1200GS 2011 Husqvarna TE449 2013 Gas Gas 300XC |
#2
|
||||
|
||||
Ouch, give Mark @ go-fasters a call he's got you covered. gonna be pricy.....
|
#3
|
|||
|
|||
If this is as big a problem as it obviously is(I stand corrected from another thread) it should be a warranty issue from GasGas Spain. Get rid of these plastic bits and send over the aluminium subframe to every friggin owner in the U.S.
|
#4
|
|||
|
|||
Thanks for the info, I have the new plastic parts on order already, but I think there should be a better alternative.
__________________
Wan is a Wannabe Rock Rider... After Riding Rocks, Wan is Wan Ball Dez 2009 BMW R1200GS 2011 Husqvarna TE449 2013 Gas Gas 300XC |
#5
|
|||
|
|||
Quote:
Has anyone else had any issues with the sub frame? It certainly is not designed to take a hit.
__________________
Wan is a Wannabe Rock Rider... After Riding Rocks, Wan is Wan Ball Dez 2009 BMW R1200GS 2011 Husqvarna TE449 2013 Gas Gas 300XC |
#6
|
||||
|
||||
There have been a few cases for sure. I would not expect factory help for the subframe if there is none for the water pump covers.
Sent from my iPad using Tapatalk HD |
#7
|
|||
|
|||
At least offer the new part at cost. There is a reason the European race models do not have the plastic subframe.
|
#8
|
||||
|
||||
They appear to have a hybrid subframe. The upper rails are aluminum, all else appears the same or very close. It would be very hard to change to a full alloy conventional design without other major changes, considering how the subframe integrates with the inner fender and air box. I would guess that a major flip with that would still allow you to ride out, but the air box integrity would be questionable. This is just speculation assuming alloy upper rails, and knowing how it all fits together as I've had mine all apart, perhaps they changed other stuff as well.
I believe most of the problem can be fixed with an inner fender design and compound change. The guys who designed this must have been the same who did the cartridge filter air box. Sent from my iPad using Tapatalk HD |
#9
|
|||
|
|||
Quote:
__________________
Wan is a Wannabe Rock Rider... After Riding Rocks, Wan is Wan Ball Dez 2009 BMW R1200GS 2011 Husqvarna TE449 2013 Gas Gas 300XC |
#10
|
||||
|
||||
Quote:
__________________
Oz Current. 2015 ec300r estart, 98 RM 125 2013 Ec300r 2011 Ec300e 2009 Husky TE310 1982 XR500 Honda 1981 KE100 Kawasaki 1978 GT80 Yamaha |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Link to WEC Heinola Finland Frame by Frame | REVERUP | Pictures & Videos | 0 | 09-16-2012 09:31 PM |
2002 frame; same as a 2005 frame, or close enough? | Trooper Sam | Enduro Chassis & Body | 0 | 06-10-2010 09:18 AM |