|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
2018 GG EC250 riders help please.
Anyone got a jetting combo for a post-cut head?
Squish 1.35mm.
__________________
Gas Gas 2018 EC250 Six Days - sold Last edited by Gibnut; 07-27-2018 at 08:00 PM. |
#2
|
|||
|
|||
did you ever just trynthe Beta jetting in your gasgas? I used the Beta jetting chart on my 300 gasgas and it run great!
|
#3
|
|||
|
|||
I have the RK Tek head running 1.1mm squish and domed for race gas. Currently I’m running VP110 and Amsoil Dominator @50:1. N3CH needle 182m and 42p. Stock Slide slightly cut. Bike is nice and clean from bottom to top
Sent from my iPhone using Tapatalk |
#4
|
|||
|
|||
Put it in a dyno??
__________________
EC300 2019 (11 Gassers owned, many more to go) |
#5
|
|||
|
|||
All good. Slide was sitting too high in the carb, giving a closed throttle lean condition. Weird, as the bike was idling fine at a/s 1.5.
Rode this morning 14c, 100m ASL, NEDW#3, 42p/175m, a/s 1.5, Motul 710 @ 2% in 98RON. Smooth, quiet & grunty power all the way. Case closed, nothing to see here, very, very happy this saga is over! Keg, thanks for your help with TSP/pistons/etc, etc.
__________________
Gas Gas 2018 EC250 Six Days - sold |
#6
|
|||
|
|||
Great to hear it is all sorted.
__________________
EC300 2019 (11 Gassers owned, many more to go) |
#7
|
||||
|
||||
Why doesn't your bike spooge anymore? I think you should try another oil again
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TSP head mod - 2018 EC250 | Gibnut | Enduro Product Reviews | 27 | 04-27-2019 09:25 PM |
2018 EC250 squish, jetting & pistons | Gibnut | Enduro Engine - 2 stroke | 27 | 10-17-2018 08:15 AM |
Gas Gas 2018 EC250 Six Days - 4th ride | Gibnut | Pictures & Videos | 3 | 02-28-2018 12:07 PM |
Gas Gas 2018 EC250 Six Days | Gibnut | Enduro Product Reviews | 14 | 01-23-2018 12:00 AM |
2018 EC250 - Wins first time out! | rossi | Off Road Racer's Corner | 16 | 03-23-2017 02:34 PM |