![]() |
|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
ok just purchased jd kit for my 03 ec300.tomorrow gonna play with it.riding from 2000ft to about 5000.i will follow jd instructions.but any input would be apreciated
|
#2
|
||||
|
||||
![]()
I would think with a jd kit, you will be fine. I was shocked when I opened up my 01 300 when I did a ltr jet kit. Mine was jetted oe for leaded gas...
It had a 35 pilot in it, which I had never seen before. I am about the same altitude as you and have been switching between a 42 and a 45 pilot. The ltr kit came with a 45, which I (insert dummy here) thought would be too rich, but seems to be fine. I think the main is a 170 or 175, don't remember for sure. I am running the oe needle, center clip.
__________________
broken down over 60 slow rider.. Last edited by jhendr3702; 05-08-2009 at 08:38 AM. |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
07 EC300 Stock Spring Rates? | cladoo | Enduro Suspension | 8 | 04-16-2007 03:43 AM |