Trail Tech bike computer

[sammyj18]

Hey Guys,

I bought a Trail Tech bike computer from Gofasters and just got around to trying to install it. I was wondering if someone who has this computer can post a pic of exactly how the sensor is mounted to the caliper. The instructions show it on japanese and KTM's, and I have an idea how I want to do it....just wanted to see a pic of someone elses work before I drill.

This is the last thing I have to do to my 03 200 and I'll post some before and after pics.

Thanks!
Sam

[REVERUP]

Put down the drill and back away from the motorcycle.

The caliper comes stock pre drilled and threaded for a sensor. I don't have a pic handy but with a little inspection of the caliper you will see it.

Roscoe

[jloza]

I have it installed on my 2000 xc 250 and can take and send you a picture if still needed. Just let me know.
j-loza@umn.edu

[sammyj18]

Hmmm ok im feeling like kinda a dummy but I cant find any predrilled hole that is the right size. Here is a pic of my caliper maybe it is not the stock one?

[sammyj18]

I guess I need a lesson on how to get pictures in my threads too haha, anyway here is a link

http://www.flickr.com/photos/30164261@N04/2824681603/

[eff]

Originally Posted by sammyj18

I guess I need a lesson on how to get pictures in my threads too haha, anyway here is a link

http://www.flickr.com/photos/30164261@N04/2824681603/

What is that stuck in the hole just above the lower mount? That look like where mine is mounted:
http://www.gasgasrider.org/gallery//...cat=&ppuser=28

[sammyj18]

its some kind of broken plastic part that was in there when I bought it....I'm guessing maybe it was from some kind of disc guard the previous owner had?

Sam

[eff]

You may want to try and remove it carefully. I think that is your sensor hole.

[sammyj18]

OK I think this is why I was so confused. Here is what the sensor end of my cable looks like

http://www.flickr.com/photos/30164261@N04/2831040963/

Does the plastic piece pull off the end leaving just a circle shaped sensor to fit in the predrilled hole? I havn't really tugged on it yet cause I don't want to break anything.

Thanks,
Sam

[eff]

That one is supposed to be mounted on the fork guard. I would see if you can exchange it for the KTM OEM one.