|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Triple Clamp questions!
Hey folks,
Well I was out on my 97 Ec250 last weekend and noticed that my triple clamps are cracked! I guess the previous owner liked everything really tight! Anyway, I'm huntin for a new set of triple clamps but since so many other parts are transferable from other bikes to the GasGas what about triple clamps? Any info on this topic>? THanks - Josh |
#2
|
||||
|
||||
BRP has the upper triple clamp for GasGas bikes from '97 to '05. They don't make the lower clamp though. Which clamp was broken?
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#3
|
||||
|
||||
Both are cracked. Basically on the outside of the clamps there are some hair line and some large cracks on each bolt area. I just changed the fork seals and oil and when I was mounting the forks I noticed it didn't snug up and felt like something was wrong. Then I noticed the cracks. So I need a whole set but since GasGas has changed it's part dist. no dealers can even order me a stock set or check to see if they even have one in stock. Sounds like I'm screwed for a couple weeks. Bike for sale? haha
|
#4
|
||||
|
||||
Josh,
I'm pretty sure the original billet clamps were prone to cracking, if thats what you have. Do you have the original 45m conventional Zokes? I'm sure you tried Town & Country. Try some of the bigger dealers like GoFasters, RT&T and Halls. Perhaps you could get a newer set of clamps and have bushings machined to fit the 45mm tubes. You could even correct any differences in offset this way. What would be an even better, but a more $$ solution, is to put a newer set of WP or Zoke inverted forks on the bike, with associated clamps. I see your in Stockholm, I'm in Jefferson. I'm sure we ride the same trails. |
#5
|
||||
|
||||
Gas Gas North America were replacing these on customers bikes back in 1998, for free. (Recall?)
GoFasters bought all their inventory, they may have some in stock. |
#6
|
||||
|
||||
Guys thanks for all the information. I actually talked to Steve at GoFasters last night and he was sure they had something that would fit the bike.
GMP - Who do you ride with in J-town? I ride the stockholm area more but have a crew of cats to ride with in J-town every Sunday when we venture that way. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Triple clamp ?? | rippn450 | Enduro Suspension | 22 | 04-18-2011 09:21 PM |
Top triple clamp | pharrell | Enduro Chassis & Body | 10 | 01-16-2009 12:57 AM |
BRP top triple clamp | Link | General Discussions & Announcements | 1 | 11-08-2007 08:28 AM |