|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Fuel tap rebuild kit
Good folks. A mates tap is playing up, as is his float needle. Double whammy. He'd cleaned it all out but several rides later same thing but strangely his tap seems to be leaking like crazy on 'off'.
It emptied right down to reserve, so no, he hadn't turned it to reserve. It dumped a complete tank in my van last year so I have a vested interest I suspect the main seal will be damaged. Does anyone know the crossover or where to get a kit?
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#2
|
||||
|
||||
Hi F5
Don't know about a seal kit/repair kit but here in Europe you can buy the complete tap and filter for 1996 to 2009 model for less than 18 euros. GasGas part number is BE25610031 https://www.motocrosscenter.com/shop...0485-104x.html The 2018 model fuel tap for just under 11 euros, GasGas part number BE76020GG-CLJ-1 https://www.motocrosscenter.com/shop...gg-clj-1.html# I've never had a fuel tap apart, is it just O rings inside, if so could they be measured up to source replacements? All the best, Dave. |
#3
|
||||
|
||||
Thanks. It's a 2010 . They usually are just a wavey washer and a formed circle seal with holes in the right place. I guess 6 different sizes would cover 90% of bikes made since Indian Boardtrackers (facts and figures purely made up). I could pull the thing down and with a friendly shop match up with a 1998 KTM 250. For which I won't be able to get parts for anyway.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#4
|
||||
|
||||
Just out of interest...
How is it sourcing GasGas parts in New Zealand. Do you have many dealers who stock parts or do you rely on ordering from websites? Cheers, Dave. |
#5
|
||||
|
||||
Um. . . Not too sure really, kinda buy most stuff aftermarket, but a couple of dedicated dealers stock things like water pump seals and shafts etc. Mate got a bendix last week ok.
Gee I guess I should check if it's a spare part. Wait right there. . .
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#6
|
||||
|
||||
No its not listed.
Hey! Why have I put this in the engine section? Thought it was in carb area, oh well.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebuild Kit | joe gas gas | Enduro Suspension | 0 | 12-20-2015 03:46 PM |
First top end rebuild on 07 300.. | spooly | Enduro Engine - 2 stroke | 0 | 12-11-2014 04:14 AM |
Top end rebuild | forgiven | Enduro Engine - 2 stroke | 9 | 12-05-2013 11:01 AM |
Can I do a rebuild myself? | stix49 | Enduro Suspension | 5 | 09-06-2012 12:39 PM |
Fuel range and fuel light | sanderjavant | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 01-05-2008 02:35 AM |