|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Help Please!
I bought a used 2010 ec250 this year. I sent to forks out to get set up. I just heard back that the forks are no good. tubes crushed from clamps and everything inside was over tighten and is striped. looked a $1100 just in parts that gasgas does not have.Anyone have any ideas or forks for sale.
|
#2
|
|||
|
|||
Bummer!!
There is a v long thread in suspension section about fork swap. May be worth a read ... seem to remember someone had a front end for sale on one of the last pages
__________________
2003 txt250 Pro 2013 Ossa 280i |
#3
|
||||
|
||||
robicon,
Actually your in a better position than Brent, as you have the Sachs, right? You should be able to use your clamps with a KYB swap. Do a search there ware a few discussions including fork sizes, etc. I would do that for sure, you will end up with better suspension than OEM. |
#4
|
|||
|
|||
I agree with Glenn. Much better to start with clamps that are closer to the right size. I can tell you even with a bored out lower ,I have pounded the snot out of the front end, and it is holding up so far. Knock on wood.
I would not hesitate in the least to invest some time and money into a KYB, WP, or Showa. Parts, service, etc are easy to find and the internet is full of help. |
#5
|
|||
|
|||
Ya thanks guys I was thinking a swap would be best. I will do a search hopefully I can come up with something that won't brake the bank.
|
#6
|
||||
|
||||
I saw a set of forks on ebay
|
|
|