|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Converting a EC200 to a EC300
I have heard that it is pretty easy to convert the EC200 engine to a 300, but not sure exactly what I would have to do, any suggestion or information would be great, thanks.
|
#2
|
||||
|
||||
Sorry - but this is not true. The cases are different on the 200 from the 300 and the crank is different, etc.
It is easy to swap the top ends between a 250 and a 300... You probably can swap the entire motor in your case without alot of issue... jeff
__________________
|
#3
|
|||
|
|||
Is that true on older models, I have a 2000 GasGas EC200, thanks.
|
#4
|
||||
|
||||
Yes - this applies to your 2000 model.
jeff
__________________
|
#5
|
|||
|
|||
Great thanks.
|
#6
|
||||
|
||||
i did it, although not the way you would think. pull complete 200 motor out. place complete 300 motor in. go riding. you can use the clutch and ignition and engine covers from the 200. but the cases/crank/cylinder and head gotta be 250/300.
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#7
|
|||
|
|||
Quote:
It is fairly easy to make a 250 in to a 300. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
98 ec250 converting to WP forks / caliper ?? | 98ec250 | Enduro Chassis & Body | 2 | 11-18-2010 12:19 PM |
Converting a Sachs shock to fit a bladder? | Keg | Enduro Suspension | 12 | 06-22-2009 11:17 AM |
Converting 2009 EC300 to Motard | cheekeon | Enduro Chassis & Body | 0 | 04-12-2009 03:04 AM |
Impressions of the '08 EC200, EC300 and FSR450 | bergerhag | Ride Reports | 3 | 04-28-2008 05:01 PM |