|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
dyna ring install ?
anyone have any problems setting/getting the internal gap set right on the dyna ring ?... If i take out one clutch friction and steel it works perfect.. Alan is going to send me another 2 mm thick washer to stack on the other one . He said i need all the clutches in there.. I had all the washers in there last night and was just starting to get gap...
he said the measurement he got was from a 2010 gg for the washer and mine is an 01, but i dont see any diff in the clutches anyway.. just wondering.. Alan is very helpful... very good service...
__________________
broken down over 60 slow rider.. |
#2
|
|||
|
|||
I was one of the guinea pigs for the GG's. I first started with a Magura Master Cylinder, and had nothing but problems. Then Allen came up with the window fix for our MC's and things went better. Make sure U back bleed the clutch. This is key.
Allen sent me the shims and a new knob with a packet of special grease. The grease eases the turning of the adjustment knob and lubes the O-ring. He actually walked me thru the adjustment over the phone. Good luck. Let us know how U like it.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#3
|
||||
|
||||
the instructions now have 2 different ways to set the end gap... the way you are talking about is done externally, i am trying internally...I think it will work great and the internally adjustment, the clutch lever feels the same and no adjustment knob on the master... Once i got a gap on the pressure plate it worked perfect, but i had to take one friction and 1 steel out to get that...
i think with the extra washer under the pressure plate it will be fine.. feels really wierd to be setting on the 300.. in gear... idling... no clutch in.. as soon as you pick up the throttle , it starts moving.. Cant wait to try it out. we are riding some serious single track.. Big rocks.. Stalled it last ride and luckily i fell on a VW sized rock, and did not fall about 20' down to the next set of rocks...
__________________
broken down over 60 slow rider.. |
#4
|
||||
|
||||
Can you run the LHRB with these dynarings like the rekcluse?
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
#5
|
||||
|
||||
dont know... have not got to ride mine at all yet.... i think that would be way cool...
__________________
broken down over 60 slow rider.. |
#6
|
|||
|
|||
I'm almost positive Revloc has the LHRB. Call Allen at Revloc.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Revloc Dyna Ring | MonsterTruck | Enduro Product Reviews | 10 | 04-18-2011 07:24 PM |
Revloc Dyna Ring | ducrider | Enduro Product Reviews | 2 | 09-20-2010 03:08 AM |
TuBliss users...New install tips to know!! | Skidad | General Discussions & Announcements | 13 | 08-21-2010 08:15 PM |
Force Radiator Guards Install Q | Brian | General Discussions & Announcements | 3 | 06-13-2010 01:14 PM |
top end install help!!!! | rdbandkab | Enduro Engine - 2 stroke | 12 | 01-19-2007 04:20 PM |