|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
'18 EC300 Airbox Cover Falling off
The 2018 EC300 airbox is held on by metal lugs which go through a rubber grommet. This is neat because I can pull it off without tools.
However this is terrible because it falls off by itself when revs get high i.e. EVERY RIDE. How have people secured this? |
#2
|
||||
|
||||
Quote:
Disclaimer: I don't own either of these bikes, I just take this from memory.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
||||
|
||||
Check post #20 in the ?2018 tech tips? sticky. It refers to adding some KTM grommets & has some explanation.
Jeff
__________________
'18 GG XC 300 '05 GG DE 300 '01 GG txt 321 |
#4
|
||||
|
||||
kit
Theres an upgrade kit from rieju . got one from AZ moto
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The airbox on EC300 2013 is terrible | Larsa | Enduro Intake/Carburetion - 2 stroke | 9 | 08-11-2015 05:42 PM |
Removing '05 airbox cover | Trooper Sam | Enduro Chassis & Body | 7 | 01-23-2012 11:19 AM |
New 2010 EC300 Engine Noise (falling revs) | Jakobi | Enduro Engine - 2 stroke | 11 | 11-16-2010 06:41 PM |
airbox washing cover? | roostafish | General Discussions & Announcements | 3 | 01-19-2010 01:10 AM |