Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-15-2007, 03:53 AM
fullthrottle's Avatar
fullthrottle fullthrottle is offline
Senior Member
 
Join Date: Nov 2007
Location: South Australia
Posts: 174
Default 06 ec250 knock (off idle)

hi cool website this is my first post, my bike has a slight knock straight off idle, i ride close to sea level in temps from 10c-35c its NOT the chain slider because it can do it in nutrel with bike stopped.

my jetting is

42pilot (40 std)
std needle (dont no number)
#7 slide
178 main (180 std)
air screw about 2 turns

should i go richer again on the pilot of try lifting the needle?

thanks in advance
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas gas won't idle? read this! ricardo cabeza Enduro Intake/Carburetion - 2 stroke 19 10-07-2013 01:33 PM
can,t get idle up geno Enduro Intake/Carburetion - 2 stroke 1 04-18-2010 08:49 PM
EC 250 05 noo idle. settings?? Laban1234 Enduro Intake/Carburetion - 2 stroke 5 07-21-2009 11:13 AM
low rpm/idle knock joey11 Enduro Engine - 2 stroke 13 07-10-2008 07:42 AM
pwr valve knock dustbuster Enduro Engine - 2 stroke 10 08-06-2007 01:36 AM




All times are GMT -5. The time now is 09:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org