Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-10-2013, 03:10 PM
smallpuffydog's Avatar
smallpuffydog smallpuffydog is offline
Bronze Level Site Supporter
 
Join Date: Nov 2010
Location: Durango, CO
Posts: 223
Default 2007 to 2011 Frame Compatabity

I apologize for asking this question since it looks to be all but answered in a recent thread, but...I could use just a little more reassurance that I am not setting myself up.

I am sereously considering swapping the frame out on my 2007 300 for an 2011 frame.

Other than plastics is there anything that I will not be able to swap between the two years such as triple clamps, subframe, swing arm, rear brake...the only thing that I could really come up with are the plastics (air box & frame guards)
Thanks,
Matthew
__________________
Believe nothing, no matter where you read it or who has said it, not even if I have said it, unless it agrees with your own reason and your own common sense. [Buddha]

Last edited by smallpuffydog; 05-10-2013 at 04:05 PM.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Seat mount 2007 - 2011 Jakobi Enduro Chassis & Body 6 02-06-2013 09:32 AM
Powdercoating the Frame on a 2011 andykr87 Enduro Chassis & Body 19 12-10-2012 07:39 AM
2011 Engine / Frame alignment question rxmx Enduro Chassis & Body 1 04-22-2012 11:30 AM




All times are GMT -5. The time now is 11:31 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org