Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-27-2016, 05:29 PM
2stroke 2stroke is offline
Member
 
Join Date: Mar 2016
Location: Annandale, Minnesota
Posts: 44
Default Radiator Thermosat

I have as 2006 Gasgas EC 300 and recently put on a Trail Tech Striker with speed and water temp capabilities. What I found was that my bike would never get above 150 degrees while riding. I even tried to get it hot by slowly going around in first gear. Even stopped and idling or revving the engine it barely got to 170 before I gave up. I am considering putting in an inline thermostat in the right radiator line. I saw a 2011 with one installed, and was wondering if this was ever a stock option, or what the best aftermarket option is. I am thinking 165 or 170 should be the minimum temp the engine should be at.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which radiator cap VINTAGE RACEWEAR Enduro Engine - 2 stroke 3 01-19-2015 03:36 PM
radiator? ?? spooly Enduro Engine - 2 stroke 7 04-15-2014 10:25 AM
radiator wence Enduro Engine - 2 stroke 8 06-23-2013 02:17 AM
Need a radiator Silver General Discussions & Announcements 0 08-30-2010 04:48 AM




All times are GMT -5. The time now is 11:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org