|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
on my 07 I jacked with all sorts of different needle/pilot/screw/main combos for a couple years, same problems you are having. I finally broke down and bought the JD needle kit and it still sucked. I called JD and he sent me a fatter needle, the rationale was my bike likely had very high time on it (I am the third owner) and the "needle jet" as he described it gets worn out from the needle going in and out of it. So he suggested a new carb OR to try a fatter needle (which he sent to me at no cost). In my case, he was right, and the fatter needle fixed it. Now it runs clean at all throttle positions
__________________
07 GG EC300 11 GG EC300E |
Tags |
rich running |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2004 EC200 running rich won't idle | malcolml10 | Enduro Intake/Carburetion - 2 stroke | 7 | 02-18-2017 11:46 PM |
ec300 running hot? | andy176 | Enduro Engine - 2 stroke | 3 | 02-03-2015 07:41 PM |
Running rich | Evans P | Enduro Intake/Carburetion - 2 stroke | 2 | 02-26-2010 12:50 PM |
My 06 EC300 not running properly! | ju571n | Enduro Intake/Carburetion - 2 stroke | 21 | 07-26-2009 06:57 AM |
Running rich | rustygun | Enduro Engine - 2 stroke | 4 | 06-20-2008 04:18 PM |