|
Riding Techniques & Training Increase Riding Skill, Physical and Mental Training, Weight Loss. |
|
Thread Tools | Display Modes |
#18
|
||||
|
||||
Stalling can be caused by so many things. jetting, ignition, clutch, and idle. I was running a 50 tooth rear sprocket on my '05 EC300, but after the getting the cut head, I had TOO much low-end grunt which is the reason I ended up with the head. But, taming power is way easier than making more, so I changed to the CCK needle (now a CCL), #7 slide and dropped to a 49 tooth rear sprocket. If I put the LTR needle and #8 slide back in I would need to drop to the stock 47 tooth sprocket. I plan on trying this out someday.
__________________
Mike Baxter 2005 GasGas EC300 (Ohlins front and rear) 2007 Yamaha FZ1 2003 Pampera 280(hers) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Getting trials bike clutch feel on an enduro bike? | SpeedyManiac | Enduro Chassis & Body | 3 | 12-01-2010 02:11 PM |
Help me ID my bike | lvnspeed | Enduro Engine - 2 stroke | 2 | 01-15-2009 07:49 AM |
Bike stalling out | smnl4l | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 11-19-2008 11:06 PM |
new bike | gaser | General Discussions & Announcements | 4 | 11-05-2007 08:11 PM |