|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
07 timing?
Hey Guys,
Just rode a six hour day / night ride and I am still having the bike ping at wot and bog down going from 1/4 throttle to wot, unless I feed it gradually. Talking to a mate, he says that it sounds like a timing problem. I had a previous thread about timing but didn't ask what the actual timing before Tdc should be. Does anyone know what this is ? The bike is an 07 Ec300 and I assume it is an Australian version as I am in Oz(not sure if they are different). I am running castrol tts oil at 32:1 with 98 octane unleaded. My jetting is 180 main,42 pilot ,1.5 turns on idle screw, N1eg plug, 2nd clip from top. Any ideas or help would be great as I am scared to ride this normally for fear of seizure etc. Thanks in advance , Mark. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
static timing 2k-2 | stainlesscycle | Enduro Electrical & Wiring | 16 | 04-20-2012 03:44 PM |
Timing marks on 03 400 fse | endoed | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 10-13-2010 11:16 AM |
Timing a 450? | iancp5 | Enduro Engine 4 stroke (including EFI & Exhaust) | 4 | 05-28-2010 10:17 AM |
Need HELP with timing | gasser | Enduro Engine - 2 stroke | 2 | 03-23-2009 02:17 AM |
For all who know Timing?? | nwcycle | General Discussions & Announcements | 0 | 03-21-2009 11:25 AM |