Chain and Sprockets

[Rick]

I am going through my bike after a long summer break and I am behind on getting it put back togther. I needed to replace my entire drive system, after much thought and I decided to go back with aluminum rear sprocket after much debate within myself. I know that many of you guys like and use the Dirt Works Ironman drive systems, so I choose another route. My last set of sprockets were trashed. I had used AFAM rear with great results, much better over using the PBI which is what I am replacing now.

I ordered a kit, AFAM Workslite rear in a 51 tooth and the AFAM counter shaft 13 tooth and for the chain I went with the RK 520 XSO 120 links /with clip style masterlink.

I ordered everything from http://www.sprocketcenter.com/ for a very good price.

Rear Sprocket PN# 15206+51 for tooth size
Counter Shaft PN# 94313A+13N for tooth size.

The PN#15206 fits the following bikes:

Beta: 400/450/525 (2005-2006)

Sherco 450/510 (2004-2007)

Suzuki DR 350 SE (1994-1995)
DR 350 S (1990-1993)
DR 250 S (1990-1992)

Husky all through (1999-2006)125, 250, 360, 450, 510, 570, 610