Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-16-2010, 01:13 PM
jason r jason r is offline
Member
 
Join Date: Aug 2009
Location: Kent,United Kingdom
Posts: 40
Default Stator and regulator rectifier help

Can anyone please offer assistance on my charging problems.I have a charge of 0.5 volts at the battery . I then checked the output directly from the reg/rec and this is reading 0.6 volts. So the problem lies with this or the stator.

Can anyone offer any assistance on how measure to resistance on the 3 yellow wires from the stator. I have got a 1.2 ohm resistance between pins 1 and 2 but can not get any readings with the 3rd pin.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
voltage regulator for 05 ec300 ktm300exc Enduro Electrical & Wiring 2 05-22-2010 03:26 PM
Voltage regulator sanderjavant Enduro Engine 4 stroke (including EFI & Exhaust) 3 09-22-2008 08:36 PM
Regulator/Rectifier Needed hudson_hollow Other GasGas Bikes/Quads 3 05-27-2008 10:33 PM




All times are GMT -5. The time now is 03:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org