What else to spend on my Ec300(07)???

[wence]

Okay guys,
I have noticed a lot of questions on what to do with a new bike when we first get it, also when a new member buys a bike the same questions seem to arise.
Maybe we could either make a special section about first mods to do after purchase for trail and race bikes, or we could just sticky a thread that people add their thoughts to here.
While I have this thread started I have a question,
I have currently done the following:
-Hid lights and floating ground mod.
-Dzus seat fastener.
-Suspension mods(front and rear), for my weight.
-Led indicators and electronic flasher unit.
-Scotts steering damper and underbar setup, this raises the bars about 1" which seems perfect.
-Re-routed the powervalve vent on right to frame vent,stubby vented fuel breather.
-unplugged the left powervalve tube to allow draining.
-Special tank/vent screw for the right powervalve vent.
-1.8 bar Ktm radiator cap.
-Force radiator guards.
-Hyde bashplate and pipe protector.
-Barkbusters.
-Endurance speedo unit.
-Brake clevis repairs.
-Rear alloy brake disc protector.
-Turntech battery with trailtech rec/reg.
-swapped peg spacer to other side of peg to move pegs back a touch and down.
- wire tied grips and threadlocked most bolts

There are probably still a few things I have forgotten.
I realise the chain guide would be a good investment , what about axle pullers etc?
Anything else?
Cheers Mark
Also