![]() |
|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have a 2006 GG 250 Marzocchi fork
my weight 85 kg without gear my Fork specs: 130mm air 4,5N/mm spring 6mm preload SAE 5 oil Rebound stack: 21 x 0,1 21 x 0,1 19 x 0,1 19 x 0,1 18 x 0,1 17 x 0,1 15 x 0,1 when I open or close the rebound screw full I don't feel a difference What is the reason? Is the thin oil bleed to much beside the first shims. Is a 22x0.1 Shim better - I want continue to use the SAE5 oil. Another problem is the fork feels a little bit uptight on the first 3cm. But the forks are parallel and the srews have right torque. Why? Last edited by Klausen; 04-05-2010 at 03:36 AM. |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fork rebound question | Jeffro820 | Enduro Suspension | 8 | 02-08-2010 08:18 PM |
Rebound one side only? | chuz | Enduro Suspension | 0 | 09-20-2009 07:15 AM |
43mm WP rebound, help! | rupecopp | Enduro Suspension | 2 | 01-03-2009 11:01 PM |
Rebound shim recommendations (stiffer) | stay_upright | Enduro Suspension | 4 | 09-20-2008 02:20 PM |
Rebound adjustment on 04 & 05 MC and EC | FFRDave | Enduro Suspension | 4 | 01-23-2008 10:25 AM |