Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-07-2007, 06:40 PM
John_B John_B is offline
Member
 
Join Date: Jun 2007
Location: Plano, TX
Posts: 15
Question '03 400 FSE not firing

Just got back from riding at Red River park today and got stranded out in the back section. I was going down a steep section and dropped the bike on it's right side. Picked it back up and lost balance and it dropped on the left side. After that it wouldn't start. I coasted down the rest of the way and tried to bump start it, no go. When I got to the bottom, I keep trying to start it. The starter had good power and would turn it over, but it wouldn't fire. After trying a couple of times, I would turn it off and let it set. I did notice that I am not hearing the normal buzz that the fuel injector makes. I don't see any damage on either side and don't see any loose wires. We finally got the bike back to camp around 5:30 this evening and got home.

Has anyone else had this problem? What can I check? What next?

P.S. It has been a great day, and got better. When we stopped to clean the bikes at the car wash, I forgot to put my boots back in the trailer. Anyone have a size 12 that they aren't using???
__________________
John B.

'03 GasGas FSE 400
'97 Honda CR 250
'02 Honda VFR800
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off





All times are GMT -5. The time now is 05:31 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org