|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Chassis set up ....
11 250 6day
well know that I have the jetting figured out ... I need something else to mess with. Right now I'm running about 5 1/4 inches of rear sag and my forks are flush with the top clamp. Sometimes the bike seems a little pushy. Of course that could be related to the suspension too ... but ....if you were going to mess with your turn in would you drop the front end say 3mm or to the stock 5mm and leave the back end along or would you leave the front alone and drop the rear sag to say 5 or 4 3/4 inches |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tire section apart from Chassis & Body | aflica | Suggestion Box | 8 | 07-02-2010 05:57 AM |
300 motor in 200 rolling chassis? | bondo | General Discussions & Announcements | 6 | 04-29-2009 08:13 AM |
Chassis & Body FAQ | webmaster | Enduro Chassis & Body | 3 | 08-02-2006 06:35 PM |