Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #21  
Old 03-25-2012, 11:20 PM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default

How much fuel is draining out? Just a few drops or much more? You might have a problem with your float/float valve. Is your overflow tube routed up or clogged? This combination makes all the excess fuel from a bad seal on float to pour right down the crank case. Kicking it over with lots of fuel in there blows your crank seals. I had this problem on an old Husqvarna, where small grit in the fuel tank slipped by the fuel screens and jammed the float needle open, with a massive fuel overflow as the result. And it blew out my crank seal.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC 300 problem!!!!!!!! clerky clerk Enduro Engine - 2 stroke 31 07-06-2011 05:19 PM
450 Clutch problem trxpeter Enduro Engine 4 stroke (including EFI & Exhaust) 4 09-03-2010 12:38 AM
And then this became a problem. dank Enduro Engine - 2 stroke 9 03-22-2010 07:58 AM
50 boy problem Sharpie Mini Gasser 's Corner 3 09-04-2008 03:58 AM
I think I have a problem SpeedyManiac General Discussions & Announcements 7 11-30-2007 11:26 PM




All times are GMT -5. The time now is 03:39 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org