Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-23-2006, 03:10 PM
barkeater's Avatar
barkeater barkeater is offline
Senior Member
 
Join Date: Jul 2006
Location: Moorhead, MN
Posts: 235
Default

We cut a stock pipe in half for some closed course races where there is no sound requirement. (private land) It gave the 300 quite a noticable shot of snot across the powerband.

I would NOT recommend it for public land use. Not much louder at idle, but when you hit half throttle it cracks and can knock the needles off the jackpine. (Aside from the fact it has no spark arrestor, doesn't meet the USFS db requirements and is highly irresponsible.)

It does improve performance, but at a very high price if you're within earshot of anyone.

Maybe we'll slip off the Turbine Core II, slip on the modified stocker and have it sound tested at the next race just to see how loud it really is.

My bet is at half throttle it's over 105 db.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
cutting out at wot stainlesscycle Enduro Intake/Carburetion - 2 stroke 13 07-17-2010 08:21 AM
FSE 450 cutting out jack1234 Enduro Engine 4 stroke (including EFI & Exhaust) 1 04-18-2008 11:20 AM
Safest/Easiest Way To Carry Trail Cutting Tools... tprnottp General Discussions & Announcements 1 01-01-2007 08:05 PM




All times are GMT -5. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org