|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to mount flag for the sand dunes
Hello folks, I'm going to to Pismo Beach this weekend and need to mount a flag on my new to me 99' EC200. Whats the best way to mount the flag? On my other bikes I have made a bracket to bolt onto the swing arm. I'm just wondering if there is a easy/better way to do this. Anyone tried a store bought bracket that bolts onto the rear axle? What model works best?
Thanks, Graham
__________________
2003 Cannondale E440R, 2007 KTM 990 Adventure, 2004 Husky TC450, 99 GasGas 200, 1958 Puch Allstate twingle 2 stroke, 98 ATK 260LQ, 02 RM85 for the lady. I like motorcycles can you tell? |
#2
|
||||
|
||||
Pismo....Beach.... Hmmm, that sand will destroy a bike..... IMHO..I know lots of guys ride there, and they even ran a WORCS Events there, but I am not a fan, but that is my .02!
The salt air, salt water in the sand, is super, super fine and will make it's way into everything, bearings, AIRFILTER, Airbox, chain, swingarm linkage, just to name a few. Plan on tossing that airfilter when your done A trip to that area would not be complete with out checking out this place. http://www.riderplanet-usa.com/atv/t.../ride_347f.htm Back in my younger years, when my family used to go to Pismo Beach. We used to drill a small hole in the fender the size of the flag stud, near the seat base. Put a big flat washer on the top of the fender and one bottom side, tighten it up, then trim the stud to ensure no contact w/ the rear time.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#3
|
|||
|
|||
Ya the sand is hard on everything that it touches. I have been to Pismo many times and it always a lot of fun. My bikes seems to withstand the abuse pretty well. I always double make sure the air filter is well oiled and all the seals are properly greased. I DONT lube the chain and wash the bikes as soon as I get home.
Quote:
I think I'm going to fab up a flag mount in the next couple day for the Gasser and the RM85. I hope the rear axle has enough room for a piece of steel to fit under the lock nut.
__________________
2003 Cannondale E440R, 2007 KTM 990 Adventure, 2004 Husky TC450, 99 GasGas 200, 1958 Puch Allstate twingle 2 stroke, 98 ATK 260LQ, 02 RM85 for the lady. I like motorcycles can you tell? |
#4
|
||||
|
||||
Ok..then your an old hat at this stuff..never can tell.
Pozo is a blast, they had rain down there this past weekend. I think there is a trail at Pozo, called "7 Steps"...a narly up hill..... Have fun! Be Safe...keep an eye out for the other guy!!!!
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
||||
|
||||
There's a cool plastic mount that bolts to the seat bolt and requires drilling a small hole in the fender. It's a sano mount. I'm not sure what brand it is. A local dealer has a bunch of them for $15 each.. If you're interested I could investigate further. You could probably call him and have them mailed to you. I know I have one around here somewhere as well. I'll never use it.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#6
|
|||
|
|||
Well I made a flag mount today by drilling a couple holes in a short piece of angle iron. I took the lock nut off the rear axle, slid the steel over the axle and put the nut back on. I think it will work well and looks just the same as the ones for sale at the moto shops for $15.
I don't like the idea of mounting the flag on the rear fender because it can get in the way when moving around on the seat and if it broke off you have a nice sharp piece of fiberglass to stab you in the butt. Quote:
__________________
2003 Cannondale E440R, 2007 KTM 990 Adventure, 2004 Husky TC450, 99 GasGas 200, 1958 Puch Allstate twingle 2 stroke, 98 ATK 260LQ, 02 RM85 for the lady. I like motorcycles can you tell? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sand riding | west aussie gas 450 | Riding Techniques & Training | 11 | 10-24-2012 07:03 PM |
Single track trails in Sedona/Prescott/Flag area? | drewgoldsmith | Western United States | 1 | 09-07-2009 08:56 AM |
Gas Gas Flag? | AZRickD | General Discussions & Announcements | 3 | 03-07-2009 04:14 AM |
Juniper Dunes Riding area, SE Wa | FFRDave | Western United States | 1 | 03-04-2008 02:37 PM |
best settings for sand | catch22 | Enduro Suspension | 10 | 09-08-2006 11:26 AM |