|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Magura clutch master (question)
This is for my 2011 EC300.
A late model KTM 2T 9.5mm will work, correct? Plug and play (same thread pitch?) , or do I need to get a new line made? Thanks in advance.
__________________
2017 Beta 300RR Last edited by Mick; 12-16-2013 at 08:46 PM. |
#2
|
|||
|
|||
Quote:
Oops, just realized you said Magura. I used a Brembo like on the 250 and 300 KTM's. Don't know about the Magura. It might be different. |
#3
|
|||
|
|||
When the Thread is the same, just plug and play. If not you need a new hose
__________________
4 strokes are only good for power generators |
#4
|
||||
|
||||
All late model ktm's are Brembo I believe.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
#5
|
|||
|
|||
Ahh that is right for the 2T's, believe the 4T's are Magura.
The new GG's have a 9.5 mm Magura, correct? Will find out, I ordered one already...if it works... great, if not we have a place here that will build me a new hose. Magura 9.5
__________________
2017 Beta 300RR |
#6
|
||||
|
||||
I could be wrong, but I believe the 4 stroke ktms are Brembo too.
I recently rebuilt my Magura 9.5 on my 2012. I was under the impression that just the 2012 GG were Magura and they switched back to AJP for 2013??? Call GoFasters, he knows. He told me the deal but I can't remember exactly.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
#7
|
|||
|
|||
Quote:
In my personal opinion Magura is not an upgrade over the stock AJP which is actually a very nice unit. A bit less bling than Magura but thats not relevant to me.
__________________
2018 EC300 Racing 2002 KTM LC4 Adventure 1988 Husqvarna WRK125 |
#8
|
||||
|
||||
I agree. I would trade my Magura for AJP in a heart beat.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
#9
|
|||
|
|||
Quote:
My 08 KTM 300 was Brembo and my 08 505 was Magura. Haven't looked at the brand new KTM's though... Quote:
I bought the new style Magura, looks to be a bit more compact than the old style. Yep, we used mineral oil quite a bit for mountain bike disk brakes, have a liter of Pentosin somewheres in the workshop...
__________________
2017 Beta 300RR Last edited by Mick; 12-18-2013 at 11:45 PM. |
#10
|
|||
|
|||
Actually mine used to leak, too, but as it was on 2 years old bike which was well used (and somewhat abused ) I just swapped in the rebuild kit - cheap job, 5 minutes and done. No problems since then.
__________________
2018 EC300 Racing 2002 KTM LC4 Adventure 1988 Husqvarna WRK125 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magura clutch MC size on 2012 XC300? | Bandit9 | Enduro Chassis & Body | 2 | 11-05-2013 07:01 AM |
2012 magura clutch lever | Diggs345 | Enduro Chassis & Body | 11 | 06-27-2013 01:30 PM |
WTB: Magura Clutch Master Cylinder + Line | egesledder | "Wanted to Buy" & "Want To Trade" | 0 | 06-07-2013 02:16 PM |
Magura clutch master cylinder on a GG??? | ktmguy23 | Enduro Engine - 2 stroke | 12 | 04-20-2009 12:44 PM |
Another Master-link question | FFRDave | Enduro Chassis & Body | 5 | 10-21-2006 07:48 AM |