2013 300E (US version) - question on GasGas turn signals, plate light, horn

[nplasson]

Thanx for the info pscook, coop, and twowheels. It looks like my harness is slightly different that pscook's. The harness does have an additional connector at the taillight that might be for either turn signals or plate light. I suspect plate light. Regarding the SICASS kit I purchased their kit for a gasgas (2010-2012) hoping that it would work for a 2013 E start and be an easy plug an play. They did mention that they had not yet seen a 2013 so there could be differences. So far I have identified differences in the stock light switch connector as well as the rear fender extension for taillight and plate. Mounting option for the front turn signals is also different as the 2013 headlight plastics do not have enough plastic for mounting. I will likely have to work out the differences with them and I am happy to help get a kit sorted out for a 2013 E start. It is a really nice kit otherwise. I was just seeing if anyone on the forum had experience with any other options (like the non-US spec harness and signals, etc.).