|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Main/idle jets...are they available at local Japanese dealers?
Rather than order from the Gas dealer and pay for shipping, does another brand dealer stock the main and idle for our bikes?
I have a 2014 300 |
#2
|
|||
|
|||
Any mx shop should stock keihin jets
|
#3
|
|||
|
|||
Problem is first thing they always ask me is what bike is it for, and that usually is the end of the conversation. Was hoping I can give them a model number to cross reference in their computer.
|
#4
|
||||
|
||||
Ask for 2006 yz kx rm 250 or ktm 250
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#5
|
|||
|
|||
It doesn't matter what bike it's on, keihin carbs are fitted to all makes, as long as you know what size your looking for
|
#6
|
||||
|
||||
See the same thing here time after time. Little knowledge, and heavily reliant on the parts fiche.. but you can't blame them.
As stated, Keihin jets are keihin jets regardless of bike. One suggestion though, is to go OEM Keihin. Aftermarket can have some sloppy tolerance issues. |
#7
|
||||
|
||||
Most of the good needles can be found on the 2006 RM250 fiche, and pilots and mains are listed on just about every Japanese MX bike.
That being said, I called five Suzuki dealers one day looking for a needle. Another time I stopped at four looking for brass and ended up ordering it anyway.
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#8
|
|||
|
|||
__________________
Dick Carnes "If ya run, you'll only die tired" 2019 EC 300 2018 GP 300 2013 XC 300 (sold) 2006 DE 300 (buddy has it) |
#9
|
|||
|
|||
A few years ago i ordered a selection of jets from one of the large online shops and when they arrived they actually sent bags of about 5 jets for each size i ordered, it was a few years ago so cannot remember which site it was, possibly motocrossgiant
__________________
2003 txt250 Pro 2013 Ossa 280i |
#10
|
|||
|
|||
possibly here
http://www.bikebandit.com/aftermarke...nd-air/pa0qh8q
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Suzuki needles, pilot jets and idle........ | Simmo737 | Enduro Intake/Carburetion - 2 stroke | 12 | 07-27-2015 11:14 PM |
Japanese Plastic Color Matching | Kris | Enduro Chassis & Body | 12 | 05-11-2014 07:32 PM |
Local blast | Diggs345 | Pictures & Videos | 4 | 11-17-2012 12:01 PM |
Local ec200 for sale.. | markwoodlief | Western United States | 2 | 06-18-2011 11:55 PM |
MotoConnection - see the banner ad support your local dealers | einsteingarage | General Discussions & Announcements | 2 | 10-17-2010 07:53 AM |