#91
|
|||
|
|||
So I have plastics on order. I'll let you know what I ended up with. It's a bit of a mix and match. My local dealer will let me take back whatever doesn't fit all I have to pay is return shipping. Wish he was a GG dealer.
I tried buying the one from Jostby but they were the wrong year. So I have some shrouds coming from Halls, I got the last ones. I also tried motocrosscenter.com but they were out as well. Also graphics from graphicsmx. Had a couple of long conversations with him today so looks like I'll get what I want all printed up.
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#92
|
||||
|
||||
I've had good luck with Greenland MX . You might try them when you need to look for parts outside the US.
RB |
#93
|
|||
|
|||
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#94
|
|||
|
|||
Pretty happy with the result. Not a perfect fit. But when you're passing me roosting on the trails, you won't notice.
It's a KTM SX front fender and number plate. Next up is graphics and seat cover.
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#95
|
|||
|
|||
Not sure if I should post this here. It's a little "hack". But I got tired of no skid plate. And I blew my stash on plastics and graphics. Plus I still need rad braces. So the skid plate is down on the list. But I'm a little nervous about a rock hitting the case.
So I used to use UHMW plastic on Jeeps and buggy's for skid plates, however they were flat. So I bought a cutting board (which is UHMW plastic). I used to have 4'x8' sheets of this stuff. And figured I'd try my hand. Who doesn't like a BPA free skid plate? So cut out and bent. Installed. Not great but a Revision 1 it's not bad. Needs a hole for the oil drain.
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#96
|
|||
|
|||
Quote:
Bike is looking awesome! Keep it coming!
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#97
|
||||
|
||||
I'm impressed! Thanks for posting.
RB |
#98
|
|||
|
|||
Am I nuts? 1999 EC 250
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#99
|
|||
|
|||
Looks just like my 2000 XC.. no counterbalancer as far as I know.
Just curious why you did away with that awesome Hebo headlight? I love how that generation looked. |
#100
|
|||
|
|||
Quote:
Thanks. I didn't like it. The lights don't have bulbs and I didn't want to mess with it. Plus not a huge fan of black plastics. I've kept it and its staying in the container with the factory original one I have. Just in case.
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swing Arm/Linkage Bolts & Nuts | mcnut | Parts | 0 | 12-08-2014 07:02 PM |
Head tube nuts | erniebearskin | Enduro Chassis & Body | 4 | 02-20-2013 10:21 AM |
Cylinder Base nuts | Marki | Enduro Engine - 2 stroke | 20 | 03-12-2012 10:04 PM |
torquing cylinder base nuts.... | stainlesscycle | Enduro Engine - 2 stroke | 17 | 03-08-2010 06:42 AM |
Front brakes driving me nuts | brains | Enduro Chassis & Body | 11 | 07-03-2009 03:49 PM |