|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EC250 parts, cylinder, triple clamp, exhaust
All parts removed from a 2007 EC250. I do have pics that I can send if interested.
BRP top, triple clamp with BRP sub mount bar clamps, Scotts Steering Stabilizer. Approximately 35 hours on stabilizer. $350 for whole setup. FMF Gnarly pipe. couple small dents. Good overall shape. could use a little cleaning up. $90 FMF Q-Stealth silencer. Very good condition. $80 EC250 cylinder. Approx 15 hours since replating by Powerseal in PA. $250 EC250 head with R+B Designs mods. Have paperwork. $125. |
#2
|
|||
|
|||
Will this fit a 2011 EC300?
|
#3
|
||||
|
||||
That's actually a trick question. Yes the 250 head will bolt on a 300 motor but the 300 piston will strike the head when you start it up. You can have the 250 head recut to match the 300 piston or change the piston and cylinder as well making the engine into a 250.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scotts Triple Clamp Part # 6043-12 & steering stabilizer handlebar clamp | jeffp | Parts | 0 | 12-31-2015 07:07 PM |
WTB 09' 200 Triple Clamp OEM | husley | "Wanted to Buy" & "Want To Trade" | 0 | 01-25-2015 10:48 AM |
WTB Top Triple Clamp | twowheels | "Wanted to Buy" & "Want To Trade" | 8 | 11-20-2014 01:47 PM |
Triple clamp ?? | rippn450 | Enduro Suspension | 22 | 04-18-2011 09:21 PM |