|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TSP head mod - 2018 EC250
After help from my buddy, Nate - a bike mechanic - I learned the slide was too high, giving a lean condition on closed throttle. After winding out the idle screw the bike is running perfectly.
Squish - 1.35mm. The bike is whisper quiet down low & so much smoother - it was already smooth as. Clean, strong power all the way through, no spooge. Brilliant. So happy this saga is over! Big thanks to Nate & Dave and Jason at TSP, Melbourne, Australia.
__________________
Gas Gas 2018 EC250 Six Days - sold Last edited by Gibnut; 07-28-2018 at 08:23 PM. |
#2
|
|||
|
|||
Here?s the head.
__________________
Gas Gas 2018 EC250 Six Days - sold |
#3
|
|||
|
|||
Looking for a list of USA shops providing squish band service.
|
#4
|
|||
|
|||
|
#5
|
||||
|
||||
Millennium.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#6
|
|||
|
|||
Millenium http://www.mt-llc.com
Web site isn’t helpful. I sent an email. info@mt-llc.com Edit: I called and talked to a non-tech. Squish mod is $81. Waiting for details from the tech. Millennium Technologies LLC 1404 Pilgrim Road, Plymouth WI 53073 phone: (920) 893-5595 fax: (920) 893-4830 Last edited by AZRickD; 07-31-2018 at 04:09 PM. |
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
I just put the RK Tek head on mine and it’s simply amazing. Bottom end is nuts and then it’s just a nice smooth pull all the way up through the RPM’s. Power was increased across the board. I dare say it is very “450ish”. If I had it to do over, I would just send my stock head to them and have it modified to accept one of their inserts. That service is only $125 vs $325 for the billet head like I have.
Sent from my iPhone using Tapatalk |
#9
|
|||
|
|||
Very nice stuff!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#10
|
|||
|
|||
Is there anything wrong with just going for the $150 rechambering?
Why is this better than the Millenium service? RK-Tek for Gas Gas: https://www.2strokeheads.com/index.p...formance-heads Quote:
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 EC250 squish, jetting & pistons | Gibnut | Enduro Engine - 2 stroke | 27 | 10-17-2018 08:15 AM |
Gas Gas 2018 EC250 Six Days - 4th ride | Gibnut | Pictures & Videos | 3 | 02-28-2018 12:07 PM |
Gas Gas 2018 EC250 Six Days | Gibnut | Enduro Product Reviews | 14 | 01-23-2018 12:00 AM |
2018 EC250 - Wins first time out! | rossi | Off Road Racer's Corner | 16 | 03-23-2017 02:34 PM |
Three Year Head Start -- Parting out in 2018 | AZRickD | Parts | 2 | 07-10-2015 09:49 AM |