#1351
|
||||
|
||||
Quote:
Quote:
I let a 250 slug run to 110hrs once. Ring ends were max spec and signifiant blow by. I can feel the bottom end snap taper off from around 60hrs usually but don't have any hard starting issues or anything.. 75hrs I usually throw a new slug in it. At the rate I'm (not) riding at the moment that will be in about 7 years! |
#1352
|
|||
|
|||
Quote:
Had great success with Bayside Gasgas, had a 30min chat with a guy there about 2018 update mods etc. I didn't even get my bike from there so I think that's pretty awesome customer service |
#1353
|
||||
|
||||
Quote:
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#1354
|
||||
|
||||
Bayside are awesome!
__________________
'18 Gasgas XC250 |
#1355
|
||||
|
||||
Fitted an AXP bash plate, it's a piece of piss to fit
If you can't fit one of these without removing the pipe you should get your estrogen levels checked to see if it's spiked Finished up most of the wiring on my trailer in time to go and pick up another Bandit on Thursday, then take the Gasgas out for it's maiden journey on Saturday Not really, they didn't do me an injustice, I just didn't like the way they conducted their business. Maybe it's me, maybe I have peculiar needs |
#1356
|
||||
|
||||
Agreed.
__________________
'18 Gasgas XC250 |
#1357
|
||||
|
||||
Quote:
Wedding is looming.. hopefully once thats passed priorities will shift back and allow a bit more seat time! |
#1358
|
|||
|
|||
the largest meeting of pilots in the world, here in Brazil with more than 5000 pilots in a single track. 2019 World Record (translate by google)
https://www.youtube.com/watch?v=-6iOQIxxdUE |
#1359
|
||||
|
||||
Well congrats on the upcoming wedding matey and commiserations on the lack of seat time! Took about 15 till mine was broken in I think. I?ll probably do oils front and rear soon for a looksie. Might even check the stacks so I can satisfy my curiosity!
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#1360
|
||||
|
||||
Took my '19 EC300 out for the first time today
I put about 4 hours on it in all sorts of terrain and never really had any issues, as posted here and on other forums it does run fat as a pig........I killed a plug after a couple of hours of riding(mostly my fault from rolling it on to bed in rings). Suspension is firmer than I'd like but I'll make adjustments before I go out again, suspension is very nice compared to my '79 DT400 though Vibration.......it's not close to what I expected after reading feedback on the interwebs. It's vibrates slightly more than my old DT400, but it's not bad enough the numb hands or feet Overall for me it's an easy bike to ride(I'm 55), maybe it's my riding style but my traps got a fair workout, enough so that I had to have a hot shower when I got home for some relief In the next few days I'm going to do some interwebs legwork as to what I need to thin the fat fuel curve and get some new boots.....my old Gaerne's just aren't cutting it Pic is atop Mt Moliagul in central Vic. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |