|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Good luck with it F5, shawbagger put me onto one on ebay I missed (again thanks mate) from U.S.
that I'll probs have to order, as i only have a few more gg dealers left to call in Aus to exhaust local option (this is an impatience thing to get her back on track) I'm getting the same from all dealers, they are left in the dark due to ktm take over and some have had parts orders cancelled on them on bikes the have in pieces in thier workshops........nice smooth take over ya orange turds !! |
#12
|
|||
|
|||
Yep roger that F5, shawbagger put me onto one (slider) on ebay I don't know how I missed that one (again thanks mate), I'll finish tomorrow morning exhausting Aussie stock just due to wanting to get her back on track, if not the bush pig will be going for a run or 2, at least the dr has all the grunt I require to compensate for my lack of skill
EC300 '07 DR650 '18 |
#13
|
|||
|
|||
Yeah got that, good luck with the conversion.
|
#14
|
||||
|
||||
Oh , hold on, I've already done a conversation with the latter model swing arm mount and a CRF250 rear guide. Just it doesn't work with 50 tooth sprocket without some jigger pokery my ne conversion is to modify the bracket to take another block I bought. Shesh, the stuff you forget. Was waiting for the chain to wear out to make the swap.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#15
|
|||
|
|||
I wonder if this isn't something that could be 3d printed using vesconite filament? (thinking ahead as worst case GG/KTM worries)
__________________
2003 txt250 Pro 2013 Ossa 280i |
#16
|
||||
|
||||
I did consider that, might ask some of the CAD guys at werk we have SLA but its media is too brittle. Also have a nasty FDM but that might be fine even if wear rate is high.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#17
|
||||
|
||||
Well, so call these Woods bikes, so I got figuring. . . Decking timber bracket.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#18
|
|||
|
|||
Hah, fits like a glove!
|
#19
|
||||
|
||||
The top piece has 5 holes to find the right pair position and I cut it too short after it was too long. Still it gets me in the right place spinning the wheel.
Next will be ally version and pick up that 3rd mount plus bits on the side to ensure it stays central. Might get those bits welded but bolts higher up might be all it needs.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#20
|
|||
|
|||
On the bench
Yep I got the fist what you meant, how did youre guide job go ?
I did my slider, used one from a 2006 ktm250, Had to drill and tap couple of 6mm holes, so now next replacement will be easy. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 EC250 chain slider | dlab07 | Enduro Chassis & Body | 1 | 03-07-2012 01:41 PM |
2002 EC200 Chain Slider | mlyle11 | Enduro Chassis & Body | 10 | 10-26-2011 10:28 PM |
Chain slider question. Please help | joey11 | Enduro Chassis & Body | 3 | 12-05-2008 06:43 AM |
chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
Slider question | Patswild300 | Enduro Intake/Carburetion - 2 stroke | 15 | 02-27-2008 07:00 AM |