|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rieger shock lower bearing
I see a few old threads with no solution. Has anyone ever found a crossover, or dimensions? (2014 300XC)
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#2
|
||||
|
||||
I know gasgaspartsguy.com was putting together a set.
Try them. |
#3
|
||||
|
||||
have to call in I guess..... the pre-KTM gassers don't have much of an existence on their website anymore.
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#4
|
||||
|
||||
|
#5
|
||||
|
||||
I sent emails to both Reiger, and Matto Cycle this morning. Lets call it a reply race! lol
__________________
2021 Beta 300RR 2014 Gasgas XC300R 2019 850 Pro RMK |
#6
|
|||
|
|||
I have just done both of mine. The outer swivel bearing can be bought separately for about 20 british pounds from splat shop, the needle roller was 6 bucks from a SKF bearing shop. Couldn't get the inner bush separate. I have replaced the needle roller with a brass bush, will see how that goes soon ( wanted to take up some play from a work inner bush, I also have another roller bearing setup that will do away with the inner bush to try at some time).
The Hell Team in Australia have a listing for the whole assembly but it is pretty pricey at 175 AUD. |
#7
|
|||
|
|||
Quote:
https://www.vesconite.com/case_studies/996/
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Reiger rear shock lower bearing | John Jinstrand | Enduro Suspension | 1 | 04-30-2018 12:00 PM |
Ohlins lower shock bearing, 2012 to 2014??? | andykr87 | Enduro Suspension | 0 | 04-26-2016 12:24 PM |
replacing the lower shock bush/bearing | imsimon | Enduro Suspension | 15 | 02-12-2016 06:49 AM |
lower shock bearing cross-ref? | fasternat | Enduro Suspension | 1 | 02-21-2007 10:20 AM |