|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#51
|
|||
|
|||
Are the JD Jett kits any good or should I just look at what most are using on here and order a few parts individually?
|
#52
|
||||
|
||||
You can get very good results and will be able to tune your bike to suit varying conditions if you buy a suitable needle and some jets and go from there. Jd kits are ok but way overpriced in my opinion.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#53
|
||||
|
||||
I agree with Nate. Order individual parts.
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/ |
#54
|
||||
|
||||
N2ZW or N8RW
anyone try N2ZW or N8RW needles?
Running N8RH in my 17 sherco 300 ser; jetted about perfect for 800'asl 60-80F I think N2ZW is a step richer than N8RW maybe in the taper? Jim Cook!!!! 2002 GG300! Looking at 2022 MR300 pro
__________________
2022 Aprilia Tuono 1100 Factory 2023 BMW R1250RS 2024 Reiju 300 6 days Last edited by alang; 11-18-2021 at 08:13 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Revised Jetting Specs NEDW | Jakobi | Enduro Intake/Carburetion - 2 stroke | 197 | 09-19-2014 08:17 AM |
'06 EC300 stock handlebar specs? | brider | Enduro Chassis & Body | 0 | 09-16-2013 03:08 PM |
What is the stock 200 needle and jetting specs | shaheeb | Enduro Intake/Carburetion - 2 stroke | 3 | 03-24-2012 10:56 PM |
2010 EC300 Factory Jetting Specs - WTF? | JP4 | Enduro Intake/Carburetion - 2 stroke | 197 | 07-04-2011 11:03 AM |