|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
flywheel weight ?
do they make aflywheel weght for a ec 300 2003 , has anyone put one on ? Do they work on a ec?
|
#2
|
|||
|
|||
do you have a real ec or the de?? A real ec would not need a fww. I'm guessing you have a de or maybe an xc. I have an 06 de with a 12 oz fww. hmmm maybe 10 oz can't remember. steahly makes fww ... also check out go fasters for'em, they will set you up with what ever you need.
|
#3
|
||||
|
||||
I put one on my EC300. You can't get much on without modifying it because there isn't room in the cover. If you space the cover out you would need a different gear lever. To be honest I couldn't tell the difference with the small weight that would fit.
|
#4
|
|||
|
|||
My 03 de 250 had one on it when i bought it. I rode it for a year with it on and when I took it off, it sure did wake the bike up. More wheel spin, but quicker revs. The only way its going back on is if it is a nasty wet mud race. I hindsight, if I didn't have it on during last year's Peace Pipe Enduro I wouldn't have finished. It was brutal.
|
#5
|
||||
|
||||
I just had a 10-oz. put on my '07 300EC. I like smooooth power. fits fine, works great, smoother power & no stalling under hard braking in corners, no regrets.
|
#6
|
||||
|
||||
Quote:
Just an FYI to others. The 2k3 flywheel is only 1 1/4oz heavier than the 2K2 (DE ignition) although it carries it's mass different which does seem to translate to snappier power delivery. There is a misconception that the 2K3 has this much heavier flywheel and it doesn't. Much higher light and accessory output though. |
#7
|
||||
|
||||
|
#8
|
||||
|
||||
[QUOTE=Skidad;22276]What ignition do you have 2K2 or 2K3 and what needle are you using? My 07 EC300 came with the 2K3 ignition.
Skidad, sorry I have no clue a/t either question. I swapped for the bike after it had been raced by the shop manager, so it was already all set up. I have a 3 year-old who wants to "help" with everything I do, so I did not even try to install the weight myself, the shop installed it for $5.... it's a nice change, I really like it. |
#9
|
||||
|
||||
Quote:
|
#10
|
||||
|
||||
I have both ignitions for my 300 and it is a big difference.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DE and EC flywheel weight | GregM | Enduro Engine - 2 stroke | 11 | 05-20-2008 04:46 AM |