|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2001 ec200 Rod Bearing Kit
I have seen posts stating that the CR250R Rod Kits will fit GG Bikes.
Can I get you guys to confirm that for my 2001 ec200, a 19XX-XX CR250R Rod Kit will fit my engine? |
#2
|
|||
|
|||
Well, Pro-X does not list the 200 on their site at all, so that is not a good sign.
|
#3
|
||||
|
||||
The 200 has a shorter stroke. So the CR 250 rod won't work.
Any reason why you can't go with the Gas Gas rod? |
#4
|
|||
|
|||
No, i tried to call gofasters today to find out what one would cost, they didn't answer, but like most everything else with the gas gas name on it, i am afraid its gonna be expensive.
So i was just trying to find a cheaper more readily available route to the same goal. |
#5
|
||||
|
||||
I think an OEM is Vesrah??? Could be wrong.....someone will chime in if..... I'm out of whack!!
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals Last edited by Rick; 01-17-2011 at 10:08 PM. Reason: ops |
#6
|
||||
|
||||
My parts manifest(07) lists the 200 and 250/300 as having the same part number for the rod kit, ME25612100, so my logic tells me that means their the same, thus if a CR rod fits the 250/300 then it will fit the 200 also.
I guess the different stroke must be in the crank not the rod. |
#7
|
|||
|
|||
The parts bbooklet that came with my 2001 lists a rod kit for a 200 but does not list one for a 250 or 300. Unless that means it shares the same one.
Its the same part number as you listed. ME25612100 |
#8
|
|||
|
|||
The 200 should be the same as the 250. Here is an explanation on the GG numbering from a previous post....
Quote:
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#9
|
|||
|
|||
That is some excellent information. I really appreciate your help with this. That really clears things up.
So I guess I am going to buy a 1984-2001 CR250R Rod Kit and give it a whirl. |
#10
|
|||
|
|||
Quote:
Doess really the cr 250 rod fit?? Take care man.. and the other guy, nice explanasion (bad english im swedish)... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebuilding my 2001 ec200 | mattholew | Enduro Engine - 2 stroke | 5 | 03-15-2011 12:28 PM |
Rear Wheel Bearing 2001 XC250 | thomasbyrd | Enduro Chassis & Body | 0 | 10-04-2009 02:04 PM |