|
Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wild rear hubs crossover
Can anybody tell me compatible rear hubs for 2004 gasgas wild?
thanks in advance, Carlos |
#2
|
|||
|
|||
Just bought a Honda 05 Trx 450 hub?!
This honda stock unit is actually made of steel rather than the stock GG aliminum unit. Part was 44.00 off the shelt at my local honda dealer. It's still a 110mm bolt pattern. Can't wait to get off work and try it out. It looks like using the honda hub I won't need the two spacers GG had installed to make up the extra axle length. I'll post more tonight after I fit it up and check the splines to fit.
Ohh I almost forgot this is for my 03 GG wild 300 HP. |
#3
|
|||
|
|||
I used a 2005 TRX 450 HUB
and it worked great! 44.00 dollars at my local honda dealer too!
|
#4
|
|||
|
|||
That's good info. Thanks.
My buddy has a 2005 TRX450R that he keeps at my place. Hmmmmm...spare hubs! |
#5
|
|||
|
|||
I used a 2005 Honda TRX 450 rear hub and its much better than the stock unit. You wont need one of the spacers that are stock with the Gas Gas Hub FYI. My part costed about 46.00 from local store.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Sprocket crossover | lankydoug | Enduro Chassis & Body | 13 | 11-04-2010 02:55 AM |
rear spokes crossover??? | kendunn | Enduro Chassis & Body | 1 | 11-24-2009 12:19 PM |
450 wild rear axle bearings | dogsbody | Other GasGas Bikes/Quads | 1 | 07-16-2009 10:03 AM |
Extended Rear Axle -450 Wild HP | Beardy | Other GasGas Bikes/Quads | 3 | 07-01-2009 07:43 PM |
'07 rear fender crossover? | ktmguy23 | Enduro Chassis & Body | 1 | 03-25-2007 05:49 PM |