|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bent foot peg pins
Anyone having problems with bending foot peg pins? Is there a solution for this? I'm 250# A rider and have had this problem on my 08 and 2010 gasser.
|
#2
|
||||
|
||||
i bent/wore some on my 2000 200. the left side one it appears gets worse from the kickstand mount.
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#3
|
||||
|
||||
I run a 10 mm allen head bolt. Get it long enough so the shaft of the bolt extends the whole length of the peg assy. and then cut the excess threads off. I also use a nylock nut. If your footpeg starts to feel a little sloppy all you have to do is snug up the bolt a little.
|
#4
|
||||
|
||||
We had problems with 05/06 pins breaking, i replaced all of em with Yamaha pins and ended the problem.
__________________
Dont follow me, You wont make it. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bent front disk.. | Vinny | Enduro Chassis & Body | 0 | 08-01-2011 04:27 PM |
2 stroke cylinder dowel pins? | Keg | Enduro Engine - 2 stroke | 0 | 01-15-2011 08:28 PM |
Radiator Bent | Niloz | Enduro Chassis & Body | 1 | 11-10-2008 01:18 PM |
bent pipe. | rupecopp | Enduro Engine - 2 stroke | 2 | 10-11-2008 11:14 PM |
brake pins '01 XC 200 | fasternat | Enduro Chassis & Body | 1 | 02-09-2007 09:21 PM |