2012 300 Race Pics - Page 16

noobi · #**151** 02-17-2012, 06:54 PM

Quote:

Originally Posted by dslrngr

Does the 2012 200 share the same pipe as the 250/300? I would also like to order a guard and possibly a pipe. Not much listed for the 200.

In the past they have always had a 200 specific pipe. However, that is the only external 200 specific part. Skid plate, rad braces, dampners etc are the same as 250/300s. So even if its not listed for the 200, it will still probably work.

HenrikSchmidt · #**152** 02-19-2012, 02:28 PM

Here is the first 2012 EC300 in Denmark, Picture taken today at the Danish Extreme Enduro Championship. The rider, Peter Weiss took 1. place on his brand new Gasser, 4 hours on ice, mud, sand and stones... Nice place to break in a new bike

..

john01 · #**153** 02-19-2012, 02:46 PM

Sweet! Wonder if it's the first 1st place for the 12.

Clay · #**154** 02-20-2012, 10:16 AM

I got my hands on a E Line pipe guard before the GA National this weekend and it fit the '12 pipe no problem. The biggest difference between the '11 pipe and the '12 pipe seems to be in the mounts and angle at the back where it attaches to the silencer. The expansion part seems to be roughly the same.

thumperrider1 · #**155** 02-20-2012, 11:04 AM

How did the bike feel now that you got a full enduro on it?

Clewis · #**156** 02-20-2012, 11:32 AM

Clay,

When do you expect the E-start 300 to be in the US?

Clay · #**157** 02-20-2012, 12:17 PM

Quote:

Originally Posted by thumperrider1

How did the bike feel now that you got a full enduro on it?

It is really, really good. The motor is awesome. Tons of torque but will rev out if needed. Didn't have to adjust the jetting. I did put a 50 t rear sprocket on it. The suspension was really good but it has to be re-sprung for the rider's weight. I did not touch the shock setting and I have been using the PFP valve to change the fork settings. Didn't hit the pegs on anything all day so the ground clearance is better. I am very happy with the bike.

thumperrider1 · #**158** 02-20-2012, 12:32 PM

Thanks Clay..........Now I REALLY can't wait. Hopefully Tim gets the bikes in early this week. VA is pretty close to GA.

Clay · #**159** 02-20-2012, 04:16 PM

Quote:

Originally Posted by Clewis

Clay,

When do you expect the E-start 300 to be in the US?

I hope they ship them next week then 30 days from ship date.

AZRickD · #**160** 02-20-2012, 04:37 PM

That would be a good time for me, from a financing/financial standpoint.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
link to 2012 into pics	kaos	Pictures & Videos	0	01-24-2012 08:52 AM
2012 GasGas 250 4T	gasgasman	General Discussions & Announcements	31	12-27-2011 08:28 AM
2012 450	tm_enduro	General Discussions & Announcements	1	11-22-2011 06:35 PM
2012 US Race Models Spares Kit	Clay	General Discussions & Announcements	8	10-14-2011 09:25 PM
2012 Six Days	TNT Cycle	Pictures & Videos	1	07-30-2011 01:15 PM