|
Injury & Recovery Injuries, Health Issues, Vision & Body Repair |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
I have ridden with glasses all my life. I have really bad vision and Lasik is out according to the doc. Tried contacts, but they are too uncomfortable with the astigmatisim I have. OTG goggles don't work either, the vibration I get is intollerable.
The best thing I have done for riding with glasses on is to buy an Arai XD1. I use the sheild for woods riding just like on a sportbike helmet. I usually have to leave it cracked open slightly to prevent fogging, but still have adequate protection. If the conditions are really bad, you can crack it open a little further until the fog goes away. |
#12
|
|||
|
|||
Another thing that works great as a anti-fog for both glasses and goggles is shaving cream. Spray it on wipe it off and your good to go.
__________________
03 EC300 The pig...04 XR650L 01 380sx |
#13
|
||||
|
||||
THere is supposed to be a new Anti-Fog spray from Bausch&Loam.
I havent checked it out yet....... |
#14
|
||||
|
||||
although i have no first hand experience of this process....
i know a guy who had the clear part of his eye peeled back and a 'contact lense' was inserted and then the clear covering was put back in place. he called them permanent contacts. the advantages are that as your vision changes, new lenses can be installed. they dont have any maintenance issues. they dont reshape your actual eye so they cant make an error in the lens spec. also he had one eye set for reading and one eye set for distant viewing. that is probably weird but he said he adjusted to it in one week. i wonder if they make progressive contact lenses, like the progressive glasses that have three perscriptions in one??
__________________
2002 Husberg FE650e 2006 GasGas EC300 2014 Sherco SER300 2014 Beta Evo Factory 300 |
#15
|
|||
|
|||
The thought of having my eye pealed apart like a onion gives me the willys.
__________________
03 EC300 The pig...04 XR650L 01 380sx |
#16
|
||||
|
||||
I bought some pro-grip goggles because I had read many times they are the best for fog-free,but I can fog-em just as easy as the smiths I've worn forever. Best thing I've tried yet is to tear all the foam out.seemed to work great last fall. Plan on trying the haber defogger system this season. I'll post my experience.
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
#17
|
|||
|
|||
I do not ride with goggles, nor do i generally ride in bad weather (i know i am lucky!) but there is a guy in this part of the world who swears by habervision eliminator goggles.
They have a little battery operated extractor fan that apparently stop any fogging prob worth checking out if you need to keep your gogs on all the time http://www.habervision.com/goggles/e...orgoggles.aspx http://www.youtube.com/watch?v=3nYiNDgLxAE
__________________
2003 txt250 Pro 2013 Ossa 280i |
#18
|
|||
|
|||
Prescription lens goggles are the only pair of goggles I ever remember losing. Go figure. I've worn glasses since my teens many decades ago. When it's cold, I take the foam out of the goggles and that does very well at keeping them from fogging. When it's dusty, I put on a pair that has foam. Fortunately, it's either foggy or dusty, but seldom both, so it's worked for me for 40 years of racing/riding. Throw on a few tearoffs when it's really bad and you are peering through several layers, but still better than nothing but glasses. Dick Burleson rode to eight national championships with no goggles, but I couldn't do either.
|
#19
|
|||
|
|||
Thanks Swazi Matt for the info on Haber Vision. The Eliminator fan module will fit most goggles. They also sell the MXT goggle/Eliminator Combo for $75 bucks. You can get double of single lenses for the MXT for $8 and $5. Plus for $25 U can get the MXT optical insert, which U take to your 0ptician and have them put your prescription lens in.
They seem to have everything covered, and for very good discounted prices.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#20
|
||||
|
||||
Thanks for all the replies on this thread. I'm now using a quick strap on my goggles, with the foam removed, anti fog spray and the gauze removed from the chin vent on my helmet. These simple changes have more or less stopped my glasses and goggles from fogging. I'm going to find out if the habervision extractor fan is available in the UK for next winter.
Keep the replies coming, hopefully others will find this thread to be a helpful reference
__________________
'00 Montesa Cota 315R '13 Husaberg TE 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
who wears body armour?? | jonny | General Discussions & Announcements | 29 | 02-12-2008 08:30 PM |
i ZON high definition eye glasses | gasgasman | Enduro Product Reviews | 5 | 04-12-2007 04:08 PM |